Before comparing Dubai service charges, identify the exact building or project, the relevant year and the property's usage. Then check the DLD Service Charge Index against a dated seller or agent quote and the property management statement.
Don't rely on an advertised rate alone. Use the checklist and worksheet below to record what each figure covers, how it was calculated and what still needs confirmation before you buy.

What to Check Before Comparing Dubai Service Charges
| Check | What to verify |
|---|---|
| Property details | Exact building, project and unit; the usage category that applies. |
| Year and period | The year selected in the index and the billing period covered by each document. |
| Area and rate | The documented chargeable area, its definition and units; whether the rate is annual and quoted per sq. ft. or sq. m. |
| Source and date | The official result, dated seller or agent quote, and a recent management statement for the unit. |
| Other amounts | What is included or excluded, plus any separately listed charges, credits or outstanding balances. |
How to Use the DLD Service Charge Index
Dubai Land Department describes the Service Charge Index as a way to enquire about RERA-approved service fees for jointly owned properties. Its service page lists website and Dubai REST app access.
The official Dubai REST guide (PDF) shows this route:
- Open Dubai REST and select Services, then Service Charge Index.
- Enter the details manually or use the map. Select the Project, Usage and Year, then search.
- Save the result with its project, usage, year, displayed rate or fee details and the date you checked it.
For the website route, start with the official service page and follow its instructions. App screens may change. If the correct project or year is unavailable, ask DLD or the management company for clarification rather than substituting another building's figure.

Compare the DLD Index, Seller Quote and Management Statement
These sources answer different questions. The index supplies an official approved-fee reference; the quote explains the number being presented in the sale; the statement shows the account details for its stated period. Compare their scope before comparing their totals.
| Source | What to check | What still needs confirmation |
|---|---|---|
| DLD Service Charge Index | Exact project, usage, selected year and every relevant amount or label shown in the result. Save the lookup date. | A project-level result alone does not establish the unit's payments, arrears or total amount due. Match it to the unit documents. |
| Seller or agent quote | Issue date, quoted rate, area basis, calculation, billing period and inclusions. | Ask for the supporting statement and an explanation of any difference from the official result for the same context. |
| Management statement | Correct unit, issue date, billing period, itemised charges, credits, payments and balance, where shown. | Confirm it is up to date and covers the period you need. Ask for missing items or unexplained adjustments in writing. |
Keep Current, Approved and Historical Figures Separate
- Current: relevant to the year or billing period you are checking. A recent document date alone does not prove that the quoted rate applies now.
- Approved: supported by the official result or other appropriate approval evidence for that project and period. Do not treat a verbal quote or forecast as proof of approval.
- Historical: a figure from an earlier period. Keep it for context, but label its year rather than presenting it as the present rate.
What to Do When the Figures Differ
- Check that the building, usage, year, billing period and area units match across the sources.
- Separate the recurring charge for that period from arrears, credits and other separately listed items. A balance due is not automatically an annual service-charge total.
- Ask the seller or agent and management company to explain the difference in writing, with supporting documents. Keep the discrepancy open until it is resolved.
If there is no result for the relevant year, record that limitation. Do not relabel an older rate as current or use a neighbouring project as a substitute. The aim is a documented figure for the property you are considering.

Dubai Service Charge Buyer Worksheet
Use one worksheet per unit. Enter only what the source actually shows. Write “not shown” or “needs confirmation” instead of guessing; use “not applicable” where a field does not fit the source.
| Verification item | DLD index | Seller / agent quote | Management statement |
|---|---|---|---|
| Building / project and unit | |||
| Usage category | |||
| Year and billing period | |||
| Document / lookup date | |||
| Source link or document reference | |||
| Chargeable area, definition and units | |||
| Rate, currency, units and period | |||
| Annual estimate / stated amount (label which) | |||
| Payments, credits and outstanding balance | |||
| Included / excluded / separate charges | |||
| Unanswered question and supporting evidence needed |
Use the Calculation Only on a Confirmed Basis
Estimated annual charge = annual rate per area unit × chargeable area in the same unit.
This formula applies only when the rate is annual and area-based, and the chargeable area is confirmed. Do not multiply a total annual amount by the area again. Keep any separately confirmed charges outside the calculation so they are not counted twice.
Keep the source documents with the worksheet. If a number is quarterly, a partial-period bill or a forecast, label it clearly and confirm the appropriate calculation before using it as an annual estimate.
Once the service-charge input is supported, see our property metric formulas for the wider calculation. This worksheet checks the input; it does not estimate a property's return.
Questions to Ask Before Committing to the Purchase
- Are there outstanding service charges on the unit? Can you provide a recent itemised statement and supporting payment records?
- Which year and billing period does each figure cover, and what evidence supports the applicable rate?
- Does the quoted amount include all relevant items, or are there exclusions, adjustments or separate charges?
- How will any outstanding balance and charges around the transfer date be addressed in the transaction documents?
- Who will answer unresolved questions, and which documents will confirm the agreed treatment before you commit?
Responsibility for a balance or adjustment should be checked against the applicable documents and requirements. If liability or a contract term is unclear, obtain qualified legal advice rather than assuming that one party always pays.
FAQs
How can I check service charges for a specific building in Dubai?
Start with the DLD Service Charge Index and select the correct project, usage and year. Save the context of the result, then compare it with the quote and management documents for your unit.
Is the DLD Service Charge Index enough to confirm my annual bill?
It is the official approved-fee reference, but you still need the unit's area basis, billing period and itemised statement to understand the calculation and account balance. Check separately listed amounts and unpaid balances.
What should I do if a seller's quote differs from the DLD index?
First check whether the project, year, usage, area basis and inclusions match. Ask for a written explanation and supporting documents. Do not treat the difference as resolved until you can reconcile it.
Discuss Your Property Shortlist with REMAX Ultima
Bring your dated evidence, completed worksheet and unanswered questions to discuss your property evidence with REMAX Ultima. For the broader decision, our Dubai property investment guide explains how service charges fit into an investment memo.
Official Sources
Process sources checked on 9 November 2026. No building-specific rate or unit account was retrieved for this guide.
- Dubai Land Department: Service Charge Index
- Dubai Land Department: Dubai REST Service Charge Index guide (PDF)
This article provides general information, not legal, tax or investment advice. Verify current property documents and seek qualified advice where your transaction requires it.

